Join Future Light & Save
Get Your First Order Discount, Early Access & Loads More!
Why join?
-
First Order Discount!
-
Exclusive Promos & Limited Drops
-
First Access to all Sales
-
Lighting Tips, Inspo & More
About Us
-
Operating since 2009 — 16 years
-
53,000+ Orders & Counting
-
35,000+ Happy Clients
-
7,000 products — More Added Daily
About
If you need quick, dependable temperature checks on-site, in the workshop, or for indoor maintenance work, this handy digital thermometer makes it easy to take accurate readings using common thermocouple types—ideal for contractors doing troubleshooting, QA checks, and general temperature monitoring.
Specifications
- Battery Specs: 1x9V 6F22 Battery
- Material: Injection Method: Single
- IP Rating: IP20 – Indoor Use
- Dimensions: 190mm x 89mm x 42mm / 7.5" x 3.5" x 1.7"
HVAC supply/return checks: Measure supply and return air temperatures in an office AHU using a K-type probe, using MAX/MIN to confirm coil performance and balance airflow.
Lab water bath calibration: Verify a laboratory water bath setpoint with a T-type probe, using AVG to stabilize readings and Data Hold to record the displayed value.
Industrial motor bearing audits: Spot-check bearing housings in a factory workshop with a K-type surface probe, comparing MAX readings across shifts to flag overheating before failures.
Cold room setpoint verification: Confirm refrigerator or cold room temperatures during maintenance, logging MIN values with a J-type probe to validate controller accuracy against independent measurements.
Underfloor heating commissioning: Check loop supply and return temperatures in a residential plant room using a K-type probe, holding readings to balance manifolds and document performance.
Install The Specified Battery: Use a 1x9V 6F22 battery as specified, and secure it properly before taking measurements.
Use Indoors As Rated: Operate indoors only per IP20 rating, and keep the instrument away from moisture, dust, and outdoor conditions.
Connect Compatible Thermocouples Securely: Attach common thermocouple types supported by the device, ensuring a stable connection before taking readings.
Allow Readings To Stabilize: Wait briefly for the sensor and measurement point to stabilize, then record the temperature for dependable results.
Power Down And Store Dry: Power down after checks to conserve the 1x9V battery, and store the thermometer in a clean, dry indoor place.
Is this thermometer suitable for indoor or outdoor use?
It has an IP20 rating and is intended for indoor use.
What battery does it use?
It uses one 9V 6F22 battery.
What are the dimensions of the unit?
It measures 190mm x 89mm x 42mm (7.5" x 3.5" x 1.7").
Does it work with common thermocouple types?
Yes, it takes accurate readings using common thermocouple types.
What tasks is it suitable for?
It is ideal for quick temperature checks on-site, in the workshop, or for indoor maintenance work, including troubleshooting, QA checks, and general temperature monitoring.
If you need quick, dependable temperature checks on-site, in the workshop, or for indoor maintenance work, this handy digital thermometer makes it easy to take accurate readings using common thermocouple types—ideal for contractors doing troubleshooting, QA checks, and general temperature monitoring.
Specifications
- Battery Specs: 1x9V 6F22 Battery
- Material: Injection Method: Single
- IP Rating: IP20 – Indoor Use
- Dimensions: 190mm x 89mm x 42mm / 7.5" x 3.5" x 1.7"
Mastech - MS6511 - Digital Thermometer
- Regular price
- R 1,867.00
- Sale price
- R 1,867.00
- Regular price
-
R 2,669.00
Couldn't load pickup availability