Perfect for homeowners wanting reliable outdoor light with a clean, modern look, this IP65 LED wall light adds practical illumination and a warm accent to entrances, patios and walkways—especially handy for clearer steps and safer movement at night, all from a simple wall-switch setup.

As an outdoor wall light, it is a natural fit beside a front entrance or on a patio wall where dependable evening light is useful. It helps make doorways and nearby steps easier to see, while adding a welcoming feel to the approach. Use it to define the edge of a seating area or guide movement between the house and garden without making the space feel overlit.

Specifications

• Wattage (Watts): 10W
• Lumen Output (Lumens): 600
• Colour Temperature: Warm White 3000K
• Voltage: 230 VAC
• Material: LED, Plastic Base with PC Opal Inner Cover and Clear Outer Cover
• IP Rating: IP65
• Dimensions: Width: 170mm, Depth: 87mm
• CRI: >70

PROMPT 1 — Covered Entrance Accent

Warm, practical entry light with textured stone.

Prompt:
Create a photoreal lifestyle shot of a South African home entrance under a covered portico. Place exactly 1 “Flye IP65 Outdoor LED Wall Light” mounted on a vertical painted masonry wall beside a wooden front door. The wall is painted a muted dusty eucalyptus-green (principal colour feature) with visible plaster texture; the door is dark-stained teak with a small brass handle. Include an understated everyday detail: a lightly folded cotton doormat edge that shows minor compression where someone would step. Keep the light’s form, lens/cover colours, housing proportions, and viewing angle identical to the supplied product photograph.

Product preservation:
Preserve the supplied product photograph without redrawing or redesigning the product. Keep its existing viewing angle, geometry, internal construction, proportions, materials, finish and colour unchanged. Only reposition and uniformly resize the complete product; duplicate it unchanged if the stated quantity requires this. Build the room and lighting around the product’s existing appearance. Supported details to preserve: the IP65 LED wall light body depth (87mm) relative to its 170mm width, the clear outer cover with an opal inner cover and its exact lens/recess profile, and the plastic base housing proportions as photographed.

Environment details:

• Setting: covered entrance wall with muted dusty eucalyptus-green textured plaster as the principal feature, plus dark teak door and natural stone paving; include one incidental detail of everyday use—a slightly compressed doormat corner at the base of the door.
• Mounting/scale: mount the single light at about waist-to-breast height on the wall, sized to match the product’s photographed proportions; align it flush to the wall surface with believable contact shadow under the housing.

Lighting:

• Room illumination: use even evening ambient light consistent with an outdoor accent (avoid inventing a different product view or any new illuminated construction; keep the product unaltered as supplied).
• Shadows: add soft, physically consistent contact shadows on the green wall and a faint shadow onto the stone paving that matches the scene’s light direction.

Mood:

Quiet, welcoming entry at dusk—practical lighting for safer steps and a calm arrival.

Camera guidance:

• Framing: a wider perspective showing the door and the mounted light, keeping a viewpoint compatible with the product’s original photographed angle and preserving the same visible face of the fixture.
• Photographic treatment: natural outdoor texture, clear product readability, the green plaster as the supporting colour feature, and the compressed doormat corner as the secondary everyday detail.
• Output 800×800.

PROMPT 2 — Patio Wall Step Definition

Modern outdoor wall with restrained colour and safe movement light.

Prompt:
Photograph a patio step-up area beside a house wall. Place exactly 2 identical “Flye IP65 Outdoor LED Wall Light” units mounted in a pair on the same wall—one near the top step edge and the second a short distance down the wall, both at the same mounting height relative to the steps and both using the same product viewing angle as the supplied photograph. Use a principal muted colour feature: dusty-blue exterior cabinet panelling (or a painted feature wall section) that runs horizontally behind/around the fixtures. Add one understated everyday detail: a single rain-sheened outdoor towel draped over a nearby rail, with slight weight-driven folds. Keep both fixtures’ construction, lens/cover look (clear outer + opal inner), and proportions unchanged.

Product preservation:
Preserve the supplied product photograph without redrawing or redesigning the product. Keep its existing viewing angle, geometry, internal construction, proportions, materials, finish and colour unchanged. Only reposition and uniformly resize the complete product; duplicate it unchanged if the stated quantity requires this. Build the room and lighting around the product’s existing appearance. Supported details to preserve: the PC opal inner cover appearance under the clear outer cover, the housing depth (87mm) relative to its width (170mm), and the overall modern wall-light silhouette and rim/profile as photographed.

Environment details:

• Setting: patio wall with muted dusty-blue painted panelling as the principal colour feature behind the pair of lights; add natural stone or concrete step edges and a weathered concrete planter; include one incidental everyday detail—an outdoor towel with light rain-sheen hanging from a rail.
• Mounting/scale: install the two units flush to the wall with consistent spacing to the steps; relative positioning should read as a deliberate pair without changing product orientation or angle.

Lighting:

• Room illumination: keep the scene in late afternoon/early dusk ambient light so colours remain natural; do not invent illumination patterns or alter the fixture’s appearance beyond the reference state.
• Shadows: create believable contact shadows on the dusty-blue surface and subtle cast shadows across the step face, consistent with one dominant direction of ambient light.

Mood:

Evening usability on a patio—lights quietly guide movement up the steps and frame a seating edge.

Camera guidance:

• Framing: wider shot that shows both fixtures and the step geometry, using a perspective compatible with the product’s original photographed face.
• Photographic treatment: crisp but natural textures; the dusty-blue panelling supports the fixtures; the damp towel detail is visible but secondary.
• Output 800×800.

PROMPT 3 — Courtyard Wall Near Seating

Muted warmth with clear glass and soft stone texture.

Prompt:
Set the scene in a small courtyard corridor leading to a seating nook. Place exactly 1 Flye IP65 Outdoor LED Wall Light mounted on a rough pale mineral-stone wall. The principal muted colour feature should be a soft clay pink outdoor bench or built-in ledge located directly beside the light (large enough to read clearly in-frame). Include one understated everyday detail: a lightly creased outdoor cushion on the bench with a slightly compressed corner where someone would sit. Keep the product’s exact form unchanged and preserve the original viewing angle and cover details exactly as shown.

Product preservation:
Preserve the supplied product photograph without redrawing or redesigning the product. Keep its existing viewing angle, geometry, internal construction, proportions, materials, finish and colour unchanged. Only reposition and uniformly resize the complete product; duplicate it unchanged if the stated quantity requires this. Build the room and lighting around the product’s existing appearance. Supported details to preserve: the clear outer cover thickness/profile and how it frames the opal inner cover, the plastic base housing shape and depth-to-width proportion (87mm depth vs 170mm width), and the exact external rim silhouette as in the reference.

Environment details:

• Setting: rough-textured pale mineral-stone courtyard wall; principal colour feature is a soft clay pink bench/ledge beside the fixture; include one incidental detail—a slightly compressed cushion corner.
• Mounting/scale: mount the single light flush to the stone wall at a practical walking-height placement, ensuring the product face stays at the same orientation as the reference and the bench sits naturally in the same perspective.

Lighting:

• Room illumination: use soft evening ambient light with warm colour balance that complements the light’s warm-white intended use without altering the fixture; keep the fixture’s visible state consistent with the provided photograph.
• Shadows: add gentle ambient contact shadows onto stone and a faint bench shadow edge consistent with the same light direction.

Mood:

Calm courtyard ambience, a quiet moment before guests arrive, suitable for evening movement toward the seating nook.

Camera guidance:

• Framing: mid-wide view including the wall, the bench ledge, and the full fixture in a perspective consistent with the product’s original angle.
• Photographic treatment: readable fixture construction with natural textures; soft clay pink bench is the supporting colour feature; cushion is the single secondary everyday detail.
• Output 800×800.

PROMPT 4 — Garden Walkway Guidance (Close Construction Readability)

Closer view that makes the outer/inner cover detail believable.

Prompt:
Compose a close, believable shot along a garden walkway wall. Place exactly 2 “Flye IP65 Outdoor LED Wall Light” units mounted vertically on two adjacent wall sections (a corner-like arrangement), each using the same original viewing angle as in the supplied product photograph. Principal muted colour feature: restrained greyed-lavender painted wall area that occupies the background plane behind both fixtures. Include one understated everyday detail: a small garden watering can with a slightly tilted handle resting on the ground nearby (no clutter—just one object). Keep both fixtures unchanged: clear outer cover framing the opal inner cover, consistent housing thickness, and no invented illumination effects.

Product preservation:
Preserve the supplied product photograph without redrawing or redesigning the product. Keep its existing viewing angle, geometry, internal construction, proportions, materials, finish and colour unchanged. Only reposition and uniformly resize the complete product; duplicate it unchanged if the stated quantity requires this. Build the room and lighting around the product’s existing appearance. Supported details to preserve: the clear outer cover and PC opal inner cover relationship, the modern wall-light body proportions (width 170mm, depth 87mm) and the exact external silhouette and rim/profile from the reference.

Environment details:

• Setting: garden walkway wall with muted greyed-lavender paint as the principal colour feature spanning the background; add natural gravel and a hint of low green planting; include one incidental everyday detail—a watering can resting on the gravel with its weight-supported tilt.
• Mounting/scale: mount two units so they read as a matched pair on adjacent wall faces while staying flush and maintaining the reference orientation; scale to match nearby paving/gravel size.

Lighting:

• Room illumination: late evening ambient with soft, neutral tones so the lavender remains recognisable; do not generate new beam patterns or change the fixture state beyond the product photo.
• Shadows: emphasize subtle contact shadows around the fixture base and a soft spill on gravel consistent with ambient direction.

Mood:

Evening garden guidance on a quiet walk—practical accent lighting for steps and path edges.

Camera guidance:

• Framing: closer composition prioritising the fixture faces and covers; perspective must keep the fixture’s viewing angle identical to the original reference.
• Photographic treatment: shallow-to-moderate depth of field that keeps the construction readable; lavender wall is the supporting colour feature; watering can is the only additional everyday detail.
• Output 800×800.