Bazuka 35W track spot
The adjustable three-wire fitting is made for indoor retail display lighting, with a honeycomb lens that helps keep the beam focused on feature products and key shelf sections.
View the BazukaFuture Light / Retail lighting guide
PRODUCT SHELVING
Retail lighting that helps every product earn a closer look
Make shelves easier to scan, colours easier to judge and feature products easier to notice with lighting chosen for beam control, colour rendering, shelf depth and the rhythm of the display.
Four ways to build clearer shelf lighting
A strong display usually combines a broad layer for the aisle with a controlled layer for the products. Start with the shelf depth, the viewing angle and the colours that need to look accurate, then choose the light source that supports that job.
1200mm food display tube
This dedicated T8 display tube suits shelving and refrigerated presentation where fresh colour matters, giving meat, bakery and deli products a more considered light level.
View the display tube
Compact recessed accent
The 3W round starlight downlight delivers a discreet 210-lumen accent for cabinets, shelves and indoor feature areas where a visible track fitting would be too prominent.
View the recessed accent
Flexible shelf-edge colour
The 24V RGBW strip adds warm white or colour-changing accents along shelf edges, display plinths and feature bays where the lighting is part of the visual identity.
View the RGBW stripGood shelf lighting is controlled, comfortable and easy to adjust.
Bright is not the same as effective. A display works better when the beam lands on the product rather than directly into the shopper’s eyes, the light level is consistent across a run, and the colour temperature supports the character of the merchandise. Leave room for aiming, maintenance and future changes to the shelf layout.
Plan the lighting by display zone
Divide the store into practical zones before selecting quantities. This makes it easier to balance general visibility with the focused highlights that guide attention.
Long wall shelving
Use a continuous linear source or repeated track positions so the ends of the run do not fall into shadow. Check shelf depth and spacing between fittings before setting the final rhythm.
Feature bays
Use a narrow, aimable beam when one collection, launch or premium product needs emphasis. Keep the fitting far enough forward to avoid a hard hotspot on the front edge.
Colour-sensitive displays
Choose a suitable colour-rendering specification and compare the listed colour temperature with the products, finishes and materials customers will be judging.
WHY THESE WORK
Match the source to the shelf, not the other way around.
Each option answers a different retail brief, from a precise beam over a feature product to a quiet line of light integrated into the furniture.
Focused light for feature products
The Bazuka track spot gives a retail display a flexible aiming point. Its 35W output and honeycomb lens make it useful where selected products need definition without turning the whole aisle into a flat wash. Use it over a hero shelf, a new collection or a display table, and allow enough distance for the beam to settle across the product face rather than the floor.
See the Bazuka track spotColour-aware food presentation
The 1200mm T8 food display tube is a practical choice for longer shelves, fridges and counters where product colour influences the buying decision. It is designed for meat, bakery and deli presentation, so it suits retail areas that need an even, dedicated source rather than a decorative accent. Confirm the fitting length and installation arrangement before planning a repeated run.
See the food display tubeDiscrete accents inside joinery
The 3W satin chrome downlight is suited to cabinets, shelves and compact display recesses where the light source should stay visually quiet. Its 210-lumen output is useful for a small accent zone, especially when several fittings are spaced to create an even rhythm across a cabinet rather than one bright point.
See the recessed downlightFlexible colour along a shelf edge
The 24V RGBW strip gives a display designer more control over the mood of a bay, plinth or shelf edge. Use warm white when products need a calm, premium presentation, then reserve colour-changing scenes for feature moments and campaign areas. Plan the profile, power supply, access points and heat management with the strip length before installation.
See the RGBW stripNeed help choosing a shelf-lighting layout?
Share the shelf length and depth, product type, ceiling height, existing wiring and the display areas that need the most attention. Those details make it easier to compare beam control, colour rendering, spacing and installation access.
Checks to make before ordering
A good-looking product image is only the beginning. Confirm the technical details that will affect the completed shelf.
Check the beam and glare
Decide whether the fitting should wash a full shelf or highlight one product group. Position the light so customers see the merchandise clearly without looking into the source.
Check colour rendering
For clothing, food, paint, décor and other colour-sensitive products, use the listed colour-rendering information and colour temperature as part of the selection.
Check lengths and access
Measure shelf runs, cabinet openings, tube lengths and cable routes. Leave access for cleaning, lamp replacement, drivers and future changes to the display.
Check the control plan
Separate general, feature and accent lighting where possible. Dimming, switching and colour control can help the store change atmosphere without moving the fittings.