Choose a rechargeable strip when you want low-level indoor light to come on as you approach, without wiring a new ceiling fitting.
A practical sensor-light buying guide
Choose motion sensor lighting for the job, not just the fitting.
The right sensor light should make a space easier to use without leaving you guessing about placement, voltage, indoor or outdoor suitability, or how the detection actually fits your routine.
Choose by applicationIndoor stripFixed ceilingOutdoor floodlightThen verify voltage, IP rating, dimensions and installation conditions.
Choose a flush ceiling fitting when you need a brighter, hands-free light in a fixed indoor position.
Choose an adjustable-head floodlight when the fitting needs outdoor protection and directional coverage.
Three sensible starting points
These routes are based on the product’s actual format, rating and electrical requirements. Start with the application, then check the fitting and installation conditions.
Rechargeable strip kit
For cupboards, shelves, under-cabinet areas and indoor passage lighting where a compact rechargeable format is more useful than a wired fitting.
- 2.4W and 240 lm
- Warm White 2700K
- 1 metre strip, USB charging
- IP20 indoor use
Flush ceiling light
For a fixed indoor fitting in passages, entrances and stair landings where a broad, brighter pool of light is the priority.
- 18W and 1500 lm
- Warm White 2700K option
- 220–240VAC
- IP20 indoor use
Outdoor floodlight
For driveways, entrances and garden edges where the fitting needs an outdoor-rated housing and directional adjustment.
- 10W or 20W options
- 800 lm or 1600 lm
- 230Vac
- IP65 outdoor rating
Compare the decision before you buy
The most important difference is not the word “sensor” on the product title. It is where the fitting will live, how it is powered and how much light the space needs.
| Need | Best starting point | Check before ordering |
|---|---|---|
| Hands-free light inside a cupboard or beneath a shelf | Rechargeable motion sensor strip | Indoor IP20 suitability, available charging access and the 1 metre strip length. |
| Automatic light in a passage, entrance or stair landing | Motion/daylight sensor ceiling light | Ceiling junction position, 220–240VAC supply, fitting footprint and chosen colour temperature. |
| Movement-triggered light outside | Adjustable-head motion floodlight | IP65 suitability, 230Vac installation, aiming direction and whether 10W or 20W output fits the area. |
Compatibility and installation checkpoints
Before you choose the fitting
- Measure the mounting area and confirm the product dimensions.
- Decide whether the light is indoors or exposed to weather.
- Check whether you need a rechargeable unit or a fixed mains connection.
- Choose the colour temperature that suits the room or route.
Before installation
- Confirm the supply voltage and installation location against the product listing.
- Do not treat an IP20 indoor product as an outdoor fitting.
- Use a qualified installer for mains-voltage products.
- Allow for sensor position, detection direction and the intended approach path.
Need a second opinion?
Tell us where the light must work.
Share the room or outdoor area, mounting position, available supply and the behaviour you want. Future Light can help you narrow the route before you order.
Choose with fewer surprises.
Start with the application, verify the electrical and environmental requirements, then select the sensor light that fits the space.