Zero Spam Promise!
Turn worktops, shelves and display joinery into a more useful and considered part of the kitchen with smooth, low-profile LED lighting. This guide helps you compare colour temperature, strip format, profiles and control before planning an under-cabinet installation.
Explore LED Strip Lights
Start with the strip’s colour and length, then add the profile or control method that suits the joinery. These options are designed to help you create an even, discreet result rather than a row of visible points.
Choose warm white where timber, painted cabinetry and evening entertaining should feel softer. The 180° beam and dotless FCOB construction are useful for shelves, coves and under-cabinet details, with dimming available through compatible 24V control equipment.
View Warm White Strip
Cool white suits kitchens where preparation areas, pale surfaces and a fresher daytime feel matter. The slim 8mm × 4mm profile keeps the fitting discreet while 1000 lumens per meter gives a clear, broad-looking line from a 180° beam.
View Cool White Strip
A 10m roll is a practical route when several cabinet runs need the same warm light and a consistent finish. Measure each section, allow for cable paths and calculate the total load before choosing a suitable 24V driver and control setup.
View 10m Warm White Roll
Add brightness control when the same cabinet lighting needs to work for food preparation, relaxed evenings and entertaining. This unit is intended for compatible 12V or 24V DC LED lighting and includes a 5m wireless remote, subject to its stated current and wattage limits.
View Wireless Dimmer
Mark every cabinet run, corner and cable exit. Keep the strip continuous where possible and note where profiles or joins will be visible.
Use 2700K for warmer evening character or 4000K for a cleaner worktop feel. Keep the chosen temperature consistent across connected runs.
Confirm 24V compatibility, driver capacity, dimmer limits and polarity before connecting the strip. Electrical work should be completed by a suitably qualified installer.
Decide whether the light should sit towards the front edge for worktop illumination or further back for a softer wash across the backsplash.
Use a suitable profile where it improves the finish, protects the strip and gives the diffuser a clean, continuous appearance.
Power the complete run, check the colour and brightness from normal standing positions, then secure the final route once the result is right.
Share your cabinet layout, preferred colour temperature and approximate run length with the Future Light team for practical product guidance.
2700K gives a warmer, softer feel that suits evening use and natural finishes. 4000K gives a cleaner, fresher appearance that can be useful over preparation surfaces. Choose based on the room’s existing lighting and the atmosphere you want.
Measure each straight run, the route to the driver, corners, joins and the space available for the strip or profile. Add the lengths together before checking the driver and dimmer capacity against the total wattage.
These FCOB strips are dimmable with compatible 24V control equipment. Match the dimmer to the system voltage and current, and confirm the wiring and polarity before commissioning.
